|
 |
 |
Intel Pentium 4 Ready. |
 |
|
Recommend for AthlonTM 1 |
 |
|
Recommend for AthlonTM /Thunderbird systems up to 1400Mhz. |
 |
|
Recommend for DuronTM |
 |
|
Works with any Pentium III processor based system. |
 |
|
Works with any Celeron processor based system |
- Built-in Quad Protection:
- Over Voltage Protection,
- Over Power Protection,
- Over Heat Protection,
- Short Circuit Protection.
- Automatic fan speed control (AFC) with built-in
temperature sensor. The power supply fan speed is regulated in
reference to its internal temperature sensor. The low friction fan
turns slowly at low temperatures, reducing power consumption and
greatly reducing fan noise. Conversely, the fan is allowed to spin up
its speed in response to temperature increase. The fan speed ranges
roughly from 1200 RPM to
a full speed of 3000 RPM.
The AFC feature, in general, extends fan life, cuts down
energy consumption, and reduce the chance of over-heating. AFC is one
step above the basic low friction "Noise Killer" fan deployment..
|
|
300Watts
maximum load
Output
Voltage |
Load
Range
MAX |
Regulation |
Ripple
Peak-to-Peak
Max. |
| 1. +5V |
25.0A |
+5%
~ -5% |
50
mV |
| 2.
+12V |
13.0A |
+5%
~ -5% |
120
mV |
| 3. -5V |
0.3A |
+10%
~ -10% |
100
mV |
| 4.
-12V |
0.8A |
+10%
~ -10% |
120
mV |
| 5.
+5Vs |
2.0A |
+5%
~ -5% |
50
mV |
| 6.
+3.3V |
20.0A |
+5%
~ -5% |
50
mV |
*+5V
+3.3V combined output should not exceed 180W
MTBF Life Expectancy of this model:
100,000
hours* (11 years & 2 months)
Operating temperature range:
10 oC - 50o
C (50 oF - 122o
F)
High standard of quality with FCC, UL, CSA, CE, TUV, SEMKO,
NEMKO, FIMKO, DEMKO, and CB certification.
|
300 Watts output.
