|
|
|
work with AMD for AthlonTM
/Thunderbird systems |
|
|
work with AMD for DuronTM
systems . |
|
|
Works with any Pentium III processor based system. |
|
|
Works with any Celeron processor based system. |
-
AC input 115V/230V switchable .
- Safety Certifications: High standard of quality
with CE and FCC certifications.
-
Built-in Triple
Protection:
-
Over Voltage Protection,
-
Over Power Protection,
-
Short Circuit Protection.
An oversight in installation process could cause short circuit, over
voltage, or over power problem. Any one of these issues could cause the
Enlight power supply to kick into protection mode which temporarily shuts
down the power output and its fan. When this happens, it is best to correct
the installation error in the system and either wait for about
30 minutes for it to be properly restored to the standby state;
or you may disconnect the power cord and connectors, then reconnect everything.
This just like a small UPS in your system to protect your system except
the battery feature.
The unit is designed to protect itself and the rest of the peripherals
that it support. The Short Circuit Protection, Over Voltage Protection,
and Over Power Protection features of the Enlight ATX power supply often
time not only save the power supply unit been blown out, but motherboard and
other important peripherals from being damaged in the transit as well.
|
|
|
1 20-pin Standard ATX connector -- the main motherboard
connector. |
|
2 Floppy connectors for your 3.5" 1.44MB drives |
|
4 Peripheral connectors for system that is really loaded |
Output
Voltage |
Load Range
MAX |
| 1. +5V |
23.0A |
| 2. +12V |
9.0A |
| 3. -5V |
0.5A |
| 4. -12V |
0.5A |
| 5. +5Vs |
1.0A |
| 6. +3.3V |
15.0A |
*+5V
+3.3V combined output should not exceed 115W
High
standard of quality with FCC, CE certification.
|