|
 
|
|
80-conductor Ultra ATA 66/100/133 IDE cable |
|
 |
All SCE USA tm Mainboards that support Ultra DMA 66, 100, or 133 IDE interface are shipped with one 80-conductor IDE cable. This means that as long as your hard drive is an Ultra DMA 66, 100, or 133 model, your system will be able to transfer data from/to your hard drive up to its full potential. If you do not have an 80-conductor IDE cable or that the hard drive is an older standard IDE hard drive, then the data transfer speed will fall back to the maximum speed of 33MB/second. You may want
to purchase one additional 80-conductor cable if you want to connect hard
drive(s) to the second IDE channel on your SCE USAtm
motherboard.
|
 80-conductor IDE cable allows faster data transfer than the original 33MB/s limit of the standard IDE cable because each line is wrapped around by a ground line to reduce data noise, thus enabling faster data transfer rate -- up to 100MB/s. |
Copyright © 2003 2006 THIRTY-DAY.COM All rights reserved.